Skip to content

Find the driver for your fixtures

Our downlights and spotlights run on a remote driver ordered on its own line. How to size one per fixture and add them all to your cart.

Updated November 11, 2026

Our downlights and spotlights are sold without a driver, so the driver can match your control system. The driver finder works out which driver each fixture takes and how many you need.

Size your drivers

  1. How the lights are controlled: choose Wall dimmer (TRIAC phase dimming), 0-10V, DALI-2 or Casambi. Click Continue.
  2. Your fixtures: click Choose a fixture, answer the questions that change its driver, such as the color of the light and the housing, and set How many. Click Add to the list, then Add another fixture for the next one.
  3. Click Show the drivers.
  4. Your drivers: review the list, then click the add to cart button, which shows the total count, for example Add 8 drivers to cart.

Each fixture runs on its own driver, sized to its wattage. A double downlight takes one driver per head. Tunable white fixtures on DALI-2 get a DT8 driver, which sets color as well as level.

Where the driver goes

Every driver ships in an enclosure, ready to install. With an IC housing the driver comes in a plastic enclosure small enough to pass through the ceiling cutout. Otherwise it comes in a metal junction box.

Common questions

Why can I not continue with Casambi?

Our Casambi driver runs several fixtures on two channels, so it is sized for the whole project rather than one fixture at a time. Send us the fixture list from the lighting design page and we will tell you how many you need.

We use Lutron or Loxone.

Most systems dim through TRIAC, 0-10V or DALI-2. Check which one your panel or keypads output, or send us the fixture list and we will confirm. The dimming guide explains the differences.

A fixture says it needs a driver chosen by a person.

Some builds fall outside the finder's sizing. Send us the fixture list and we will specify that driver for you.

More in Planning a project

Still stuck? Talk to the team.

Someone on our team will walk you through it.

Mon to Fri, 9:00 am to 5:00 pm ET
Call or text

+1 (561) 717-5044

Straight to our design team.

Email

info@nuordic.com

Send drawings, specs or questions. We reply within one business day.

Write to us
Book a call

Half an hour with a designer

By phone or video, or visit the West Palm Beach showroom.

Pick a time