Downlights
4 Inch Recessed Round Fixed IP65 Downlight
Our 4 inch recessed downlight, sealed to IP65 at the face for bathrooms, spas and covered exteriors. 10W or 20W at 90 CRI, 30 or 55 degree beam, up to 2,123 lumens. The COB sits deep behind a 48 degree shielding angle, so glare stays under UGR 13. IC rated at 10W, or 20W in its IC box.
- Beam
- 30-55°
From $115.00Made to order · ships in 20 days
Choose wattage, color temperature, beam, driver, housing and finish. Takes about a minute.
Certified & rated
- ETLIntertek listed
Configurator
Build the fixture, get the order code.
6 choices. Options that can’t combine with your choices say why.
Wattage
20W · standard20W: Needs the IC box where insulation is present
Color temperature
3000K · standardBeam
55° · standardDriver
TRIAC · standardHousing
Rough-in plate, non-IC · standardFinish
White · standardTotal, before tax
$130.00
Photometrics
See what the beam does before you cut the hole.
Pick an optic, a mounting height and a color temperature. One set of inputs drives all five views: the beam in section, the polar distribution, the spacing a run sets out at, the measured spectrum, and color rendition. Tested IES files for every build are in the downloads below.
N95R65F · Tested IES on file
Beam angle
Ceiling height
Color temperature
N95R65F · Beam section55° · 4000K · 9 ft ceilingScale varies
Beam diameter at the floor
2.86 m9.4 ft
Ø = 2 × 2.74 m × tan 27.5°Tested · 4000K2,123 lm · 3,131 cd · 21.6 W · 98 lm/W
Below fixtureBeam ØLuxIlluminance
1.0 m1.04 m3.4 ft3,130 lx
2.0 m2.08 m6.8 ft780 lx
Floor · 2.74 m2.86 m9.4 ft420 lx
Illuminance is inverse-square from the tested center-beam intensity of 3,131 cd in N95R65F-TR-20W-4000K-55D.ies, and delivered lumens are as the file states them; the diameter is geometry from the rated beam angle. The lux column is for one fixture on axis, direct. What the room adds is separate and is drawn on the section: a 0.80 ceiling over a 0.20 floor trade light until they settle 19% above the direct level, and that arrives evenly rather than in the pool, so it lifts the gaps between fixtures by as much as the centres. It is an estimate with no walls in it, which makes it the open plan figure; a small room with 0.50 walls returns a little less. For a layout across a whole plan, send us the drawings.
In the field
The family at work.
Technical specification
Family options are listed below. Available combinations depend on the configuration. Reference dimensions and performance describe the catalog reference build; confirm the selected build against its specification sheet before installation.
- Model
- N95R65F
- Aperture
- 65 mm (2.6 in)
- Cut-out (reference)
- 90 mm (3.5 in)
- Dimensions (reference)
- 64 high, 100 diameter (mm)
- Wattage (reference)
- 10 to 20 W
- Lumen output (reference)
- 802 to 2123 lm
- CRI
- 90
- Fixture voltage
- 36 V DC
- Input voltage (reference)
- 120 to 277 V AC
- Driver
- Remote
- Dimming
- Non-dimmable · TRIAC · 0-10V · DALI-2 DT6
- Ingress rating
- IP65
- IC rated
- Yes
- Finishes
- White · Black · Golden · Silver
- Mounting
- Recessed
- Trim
- Micro flange
- Environment
- Dry · Damp
- Warranty
- 5 years
- Lead time
- 20 days
- Certification
- ETL
- Color temperature
- 2700K · 3000K · 4000K
- Beam angles
- 30° · 55°
- Housing
- Rough-in plate, non-IC · Bracket, non-IC · IC box, IC rated (Insulation contact at 20W)
Downloads
- Spec sheetPDF
- IES photometric filesZIP
- Installation guideOn request
- Lead and driver wiringPDF
- CAD blocksOn request
- Revit familiesOn request
- Photometric test reportPDF
Anything marked on request we will send the same day. Ask at info@nuordic.com.
Need a layout, not just a fixture?
Send a floor plan and we will return spacing, photometrics and a bill of materials priced to your tier.
Start a Design Brief
