Aluminum Profile
45 Degree Corner Aluminum Profile, 18 mm
Model NP-C3 · Aluminum
A 45 degree corner channel for the inside angle of a wall and ceiling, a cabinet or a cove. Each face is 18.5 mm, and the 14.1 mm channel aims the tape across the corner so both surfaces are lit evenly. Each 2 m length ships with its lens, two end caps and mounting clips.
From $35.00Made to order · ships in 15 to 20 days
Choose finish and lens. Takes about a minute.
Configurator · NP-C3
Build the fixture, get the order code.
3 choices. The rest is set by the design. Options that can’t combine with your choices say why.
Standard on this fixture
- Length
- 2 mLens, end caps and clips included
Finish
Silver · standardLens
Diffused · standardAccessories
Optional · each is its own line in the cart
Spare end caps, grayPolycarbonate, sold as a pair · $2.50 each
Spare end caps, blackPolycarbonate, sold as a pair · $2.50 each
Spare end caps, whitePolycarbonate, sold as a pair · $2.50 each
Spare diffused lensPriced per metre · $8.00 each
Spare clear lensPriced per metre · $8.00 each
Total, before tax
$35.00
In the field
The family at work.
Technical specification
Family options are listed below. Available combinations depend on the configuration. Reference dimensions and performance describe the catalog reference build; confirm the selected build against its specification sheet before installation.
- Model
- NP-C3
- Dimensions (reference)
- 2000 long, 18.5 wide, 18.5 high (mm)
- Ingress rating
- IP20
- Finishes
- Black · Silver · White
- Mounting
- Surface
- Warranty
- 5 years
- Lead time
- 15 to 20 days
- Lengths
- 2 m; 1 m and 3 m on request
- Diffuser
- Polycarbonate, diffused or clear, included
- Material
- AL6063-T5 aluminum
- Each face
- 18.5 mm
- Application
- Indoor, IP20
- Channel width
- 14.1 mm
- Mounting angle
- 45 degree, internal corner
- Included accessories
- Lens, two end caps and mounting clips
- Certification
- Not listed
Downloads
- Spec sheetPDF
- IES photometric filesOn request
- Installation guideOn request
- Tape and linear power and wiringPDF
- CAD blocksOn request
- Revit familiesOn request
- Photometric test reportOn request
Anything marked on request we will send the same day. Ask at info@nuordic.com.
Need a layout, not just a fixture?
Send a floor plan and we will return spacing, photometrics and a bill of materials priced to your tier.
Start a Design Brief
